Material: TP 304/304L, 316/316L, 321, 316L with Min 2.5 Mo, T91, 800, 600, etc. Tube delivery condition: bright annealing (BA) Tube type: seamless, no welds of any kind Coil Lengths: max 90 kg per coil tube, for example 6x1 size, max length is 700m Note: the price higher follow with the longer length Standard: ASTM A269, EN10216-5 O.D. from 6 to 25.4mm W.T. from 0.71 to 2.11mm
Chemical composition: in accordance with DIN EN 10216-5 respectively ASTM A269 Mechanical and technical properties: in accordance to DIN EN 10216-5 respectively ASTM A269 Soft annealed max. Hardness 150 HV10 Tolerance +10 points Model type and surface integrity: in accordance with 10216-5, ASTM 269 Surface roughness Ra < 0.5 μm Cleanliness of the tubes: bore cleanliness in accordance to DIN 8905. The coils shall be dry, clean and free from swarf, drawn and roller marks. Pressure Test: 100% tested at the appropriate pressure stated under water. All coils must be flushed and dried after pressure testing to avoid contamination.
A non adhesive label shall be affixed to each coil in accordance to DIN EN
10216-5 respectively ASTM A269 In addition each packing unit is to be labeled with the coil length (front size 20mm).
The ends of the coil shall be sealed with end-caps, each coil has to be tied three times (no adhesive tape).
A non adhesive label shall be affixed to each coil in accordance to DIN EN
10216-5 respectively ASTM A269 In addition each packing unit is to be labeled with the coil length (front size 20mm).
The ends of the coil shall be sealed with end-caps, each coil has to be tied three times (no adhesive tape).
